Polyamide toughener & Impact modifier for PA &

We supply high quality polymidetoughener (POE-g-MAH) ----Grafted POE of maleic anhydride at competitive price. 1.1.Polyamide toughener & Impact modifier for PA & Compatilizer,plastic additive for polyamid & polyamide modifier & PA impact modifier&plastic PA impact modifier (POE-g-MAH) 1 )Speciality : It is the maleic anhydride of TPE elastomer . Appearance: white or light yellow granules . Melt index : (230,2.16kg),1.5g/10min, grafting rate : 1.0% ,density :(g/cm3) 2) Usage: a)It is used for the impact modification of PA and PA66 .And improve the impact resistance and freeze resistance, molding and processing capability ,lower the water absorption rate. b) It is used for the compatilizer for nylon and pp ,for PE alloy plastic. c) It is used for the macromolecule modifier.(bending) of mineral and nylon with fiberglass Table one :The toughened data of the PA6 resin Program Unit PA6 PA+5%(NG7003) PA+10%(NG7003) tensile strength Mpa 70 65 61 Bending strength Mpa 92 86 78 IZOD Impact Strength KJ/ 10 24 85 Table two : The reinforced and the toughened data for the PA6 Program Unit PA6+GF30% PA6+GF30%+5%NG7003 tensile strength Mpa 153 142 Bending strength Mpa 210 194 IZOD Impact Strength KJ/ 14 21 3) Advised usage percentage : 5%-25% according to the toughen requirement. Add 3-5% for PA6 reinforced and toughened ,add 5% for the PA and PP ,PE alloy plastic 4) Package &Transport : 25KGS/bag ,in the kraft bag ,it need to be transport under the dry condition according to the non-dangerous goods .