Grafted PP of maleic anhydride

1.Grafted PP of maleic anhydride&PP-g-MAH&Coupling agent for PP+FR &PP additive&PP compatilizer &Coupling agent for PP+HR. 2.ISO2008,SGS PP ,PE compatilizer seriesProduct Introduction It is made by the grafted polyolefin of maleic anhydride .Grafting offer the PP ,PE with polarity and improve the interface compatibility of the PP,PE with fiberglass ,mineral filler ,flame retardant ,etc inorganic and advance the PP mechanic strength. Appearance :granules ,PP-g-MAH & PE-g-MAH have the better effect ,lower price and more convenient for add than the traditional liquid coupling agent. Technical data ProgramNG2001NG2002NG2006NG1001NG1102NG1201NG1202Appearancewhite or light yellow granulewhite or light yellow granulewhite or light yellow granulewhite granuleswhite or light yellow granulewhite or light yellow granulewhite or light yellow granuleMFI g/10min40>10061.50.8300.8 Grafting rate %1.20.90.9110.91Basic resinPPPPPPHDPELDPELLDPELLDPE*Testing condition:230cecuius degree/2.16Kg Usage NG2001: It can be used as the compatilizer for PP with fiberglass , flame retardant, mineral filler ,etc to improve the mechanic strength and tougheness for the material.It can prevent of the fiberglass exposure and perfect the appearance for the reinforced PP.It also can be the compatilizer for PA/PP,and improve the shock strength and water absorption and improve the size stability for products. NG2002: The usage is almost the same as NG2001,with higher MFI. NG2006: If it blend with PP and it will enhance the polarity of PP, and improve the printing and spray paint of PP, and improve the compatibility of polar materials. As its melting is more closer to the melting of PP, it will have better mixing effect and have little effect on the performance of PP. For PP / EPDM system, thinning EPDM dispersed size in the PP and improve the compatibility of PP and EPDM. NG1001: To improve the polarity of PE, and improving the compatibility of polar materials. It is used for the toughening of nylon, PC, as well as the compatibility agent of PA / PE, PC / PE and PBT / PE ,etc (such alloy plastics). IIt could significantly enhance material’s mechanical properties. If NG1001 mixed with PE, it will improve the property of printing and spray paint of PE. NG1101:It is used for the toughening of nylon, PC, as well as the compatibility agent for alloy plastics such as PA / PE, PC / PE and PBT / PE ,etc. NG1201---- It can be Used as the compatilizer of the reinforced PE & the mineral filled PE ,flame retardant PE . And when put the NG1201 in the PC/PBT & enhanced PC/PBT ,It will increase their toughness, and improve their appearance and the processing performance. And it also can be used as a plasticizer to mix with PA and PBT system, and improve the PA & PBT’s toughness, but not affect their dispersity.NG1202---- It has the compatibility and toughening effect to some alloy plastic. When it used in the PC/PBT or reinforced PC/PBT with fiberglass ,it will improve the material’s flexibility, appearance and processing property.